Only needs about a 10” opening between flanges and re-faces damaged RF and FF gasket seats on flanges with a phonographic finish.

Esco Tool has introduced a new portable and compact flange facing tool that eliminates the need to cut pipe and replace flanges when replacing valves in virtually any flanged piping system.

The Esco FLANGE HOG 110® Flange Facing Tool is manually operated and eliminates the expense associated with valve replacement including cutting pipes, welding new flanges in place, and X-ray inspection. Easy to setup and use, it requires only about a 10” opening between flanges and re-faces damaged RF and FF gasket seats on flanges with a phonographic finish.

Creating a perfect finish that meets B16.5 standards, the Esco FLANGE HOG 110® Flange Facing Tool mounts to the flange I.D. in a few minutes with a clamping range of 0.9” to 10” and 0.005” alignment accuracy. Capable of rapidly machining highly alloyed flanges with a reach up to 14” O.D., it comes with straight and 90 degree tool bit holders and uses two-sided bits.

The Esco FLANGE HOG 110® is priced at $5,995.00 supplied as a complete kit with all necessary resurfacing components and is also available for rent.

ESCO Tool A Unit of Esco Technologies, Inc. Matthew Brennan, Marketing Director 75 October Hill Rd. Holliston, MA 01746 (800) 343-6926 FAX (508) 429-2811 e-mail: matt@escotool.com http://www.escotool.com

Share article on social media or email:

Questions about a news article you've read?

Reach out to the author: contact and available social following information is listed in the top-right of all news releases.

Questions about your PRWeb account or interested in learning more about our news services?

Call PRWeb:1-866-640-6397

©Copyright 1997-2015, Vocus PRW Holdings, LLC. Vocus, PRWeb, and Publicity Wire are trademarks or registered trademarks of Vocus, Inc. or Vocus PRW Holdings, LLC.